JCC Lighting, JC71276. Skytile 2900 non-dimmable Cool White. High Performance LED 34W flat panel.
• 85 lumens per circuit Watt
• Even light distribution on walls and ceilings
• Zero maintenance, no need to relamp
• Assists with LG7 workplace guidelines
• Emergency and dimmable versions
• Easy to clean wipeable surface
• Cool and warm white options
• IP44 protection against dust & moisture
• 5 year extended warranty
LED Panel, Skytile, LED, 2200 Lumens, 34W, Cool White, Aluminium Frame, IP44, Extruded Aluminium Frame, with Opal Polycarbonate Diffuser.
It is recommended that luminaires are installed by a qualified electrician to ensure that the installation complies with the current IEE wiring regulations BS7671:2008. Any broken or damaged parts should be replaced as soon as possible. JCC will not accept responsibility for any claims arising from sub-standard installations.
It may be neccessary to uprate your MCBs to allow for increased inrush current.
Read instructions and check you have all the tools and accessories required to complete the installation correctly.Isolate power supply before starting the installation.
Remove the ceiling tile from the location where you wish to install the LED panel.
Wire the LED Driver to the mains supply. Refer to Fig.1 for details(below)
Move LED panel into ceiling aperture and when positioned halfway connect the driver to the LED panel (Fig.2).
View on inside of ceiling void showing LED panel in position with driver positioned on top of it.
Top of Skytile
Reconnect mains power supply.
Note: DO NOT carry out installation tests with the driver connected to the circuit. The external flexible cable cord of this luminaire cannot be replaced: if the cord is damaged the luminaire should be decommissioned and destroyed.